Home | Open Account | Help | 310 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Western Railroad Discussion > Need a Wheel Lathe !!!Date: 11/05/12 17:45 Need a Wheel Lathe !!! Author: qman These wheels were pulled from under an MT coal rack in the field. The crew spotted something "unusual" about 30 deep and stopped to inspect. I agreed, this was a bit unusual.
qman Date: 11/05/12 17:58 Re: Need a Wheel Lathe !!! Author: mmciau That train crew should take a lottery ticket!!!!
Michael McInerney Marion, South Australia, Date: 11/05/12 18:18 Re: Need a Wheel Lathe !!! Author: electromac Was this caused by the brake on the car set?
Date: 11/05/12 18:35 Re: Need a Wheel Lathe !!! Author: tomstp Can't imagine that thing not derailing.
Date: 11/05/12 19:05 Re: Need a Wheel Lathe !!! Author: Western_Star Good thing it was empty. The other wheel and the stiffness of the truck probably saved this from a derail. I'd be curious to know what type of truck it came out of. Maybe a compressed truck like a ride-control or buckeye, just a wag
Date: 11/05/12 19:56 Re: Need a Wheel Lathe !!! Author: qman That WAS a HUGE bullet we dodged on that one !! The control valve was the culprit the caused the brakes to remain applied. Oddly, the wheels on the other end of the car were in relatively good condition. Go figure ????
qman Date: 11/05/12 20:08 Re: Need a Wheel Lathe !!! Author: dlocher Is that what's known as a flat spot? :)
David Locher Fresno, CA http://www.youtube.com/learnwithgern Date: 11/05/12 20:26 Re: Need a Wheel Lathe !!! Author: qman I think it goes a bit beyond a "flat spot" !!
qman Date: 11/05/12 21:59 Re: Need a Wheel Lathe !!! Author: sp5312 It's only flat on the bottom
Date: 11/06/12 06:14 Re: Need a Wheel Lathe !!! Author: mgwsy1978 Reminds me of this pic that someone snapped. I like how its still glowing red! I think it happened in Canada or one of the commuter railroads but there is no info on the pic.
Date: 11/06/12 06:26 Re: Need a Wheel Lathe !!! Author: qman THAT puppy is HOT !!!!!!!!!
qman Date: 11/06/12 10:38 Re: Need a Wheel Lathe !!! Author: trainman630 That'll buff right out.
Date: 11/07/12 21:34 Re: Need a Wheel Lathe !!! Author: mrsaxtonsr It's also on the ground, That will leave a mark..
Date: 11/08/12 05:39 Re: Need a Wheel Lathe !!! Author: ddg qman Wrote:
------------------------------------------------------- > THAT puppy is HOT !!!!!!!!! > > qman It WAS hot. The rusted area was probably red hot or close to it. In the wheel shop, we would condemn "overheated wheels" if the redish-orange rusted area radiated 50% in toward the hub on an otherwise servicable wheel. Date: 11/08/12 12:18 Re: Need a Wheel Lathe !!! Author: qman The flange and tread also have a "bead blasted" look about them as well. Kinda large "beads" however !!
qman |