Home | Open Account | Help | 310 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > Pontoon Bridge ProgressDate: 11/17/14 16:50 Pontoon Bridge Progress Author: LarryDoyle Bringing you up to date on progress of construction of my pontoon bridge.
Photo 1. I decided to build up the hull out of laminates (total 1" thick) of 1/4" balsa, with a 1/2" square pine end block to reinforce the part most vulnerable to accidental abuse. Here's the downstream side during curing. 2. Upstream. 3. The upstream side of the finished laminate, before final trimming. Date: 11/17/14 16:52 Re: Pontoon Bridge Progress Author: LarryDoyle Final honing to finished dimension, using "G" scale tools.
-John Edited 1 time(s). Last edit at 11/17/14 17:02 by LarryDoyle. You must be a registered subscriber to watch videos. Join Today! Date: 12/03/14 20:40 Re: Pontoon Bridge Progress Author: Thomas I had no idea how complicated some pontoon bridges were till I did what I thought would be a quick "arm chair" study a few weeks ago that went farther than I ever intended. You probably know more than I do about these things, but you can see what I discovered on my FaceBook Wall at…
https://www.facebook.com/thomas.rubarth/media_set?set=a.10203739463099475.1073741935.1005263123&type=1&pnref=story Also attached are some key design items, at least for the Prairie du Chien, Wisconsin bridge over the Mississippi River. BTW, your choice to model a pontoon bridge is very neat. Edited 1 time(s). Last edit at 12/03/14 20:44 by Thomas. Date: 12/03/14 20:49 Re: Pontoon Bridge Progress Author: Thomas |