Home | Open Account | Help | 327 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > P2K GP38-2 Shell RemovalDate: 01/25/15 19:23 P2K GP38-2 Shell Removal Author: jburek OK I removed the coupler pockets & the 2 small screws just behind the coupler pockets - instructions say shell should now just lift off, but mine won't budge. Pulling hard with no results whatsoever. Any advice/help appreciated.
Date: 01/25/15 19:37 Re: P2K GP38-2 Shell Removal Author: CR6079 The small screws behind the coupler pockets hold the weight to the frame, there are two screws by the fuel tank that hold the shell on.You may need to swivel the trucks a little to see them.
Posted from iPhone Date: 01/25/15 19:46 Re: P2K GP38-2 Shell Removal Author: jburek There's actually 3 screws behind the fuel tank -2 directly behind & one offset to the left.
Date: 01/25/15 20:06 Re: P2K GP38-2 Shell Removal Author: CR6079 The 2 directly behind fuel tank hold weight to frame the 2 that hold the body are hidden above the trucks,one in front one in back.
Posted from iPhone Edited 1 time(s). Last edit at 01/25/15 20:07 by CR6079. Date: 01/26/15 05:59 Re: P2K GP38-2 Shell Removal Author: jburek Got them - removed those 2 screws under the trucks & shell came right up. Wish instructions were a little more specific as to where those screws were located. Many thanks...
|