Home | Open Account | Help | 285 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > rail power Sd90macH shell question?Date: 10/02/15 21:49 rail power Sd90macH shell question? Author: CR4110 Hello,
I'm assuming the rail power shell is a (SD90MAC-H) fit for a kato Sd90mac? You just use the rest of the parts off a kato unit? Is this a correct assumption? Thanks Scott Posted from Android Date: 10/02/15 22:28 Re: rail power Sd90macH shell question? Author: ESPEE5318 Rail Power had their own frame , not for Kato.
Date: 10/03/15 06:54 Re: rail power Sd90macH shell question? Author: andrewcastle If I remember correctly the Rail Power Products SD90MAC was released a couple years before the Kato model. They released the shell and frame at the same time, their frames were designed to use Athearn trucks, motor, and drive shafts.
Andrew C Date: 10/03/15 06:58 Re: rail power Sd90macH shell question? Author: electromac CR4110 Wrote:
------------------------------------------------------- > Hello, > > I'm assuming the rail power shell is a (SD90MAC-H) > fit for a kato Sd90mac? You just use the rest of > the parts off a kato unit? > > Is this a correct assumption? > > Thanks > Scott > > Posted from Android It would be nice for Athearn to come out with a SD90 MAC with sound....... Edited 1 time(s). Last edit at 10/03/15 12:47 by electromac. Date: 10/03/15 07:28 Re: rail power Sd90macH shell question? Author: mmosher Date: 10/03/15 07:31 Re: rail power Sd90macH shell question? Author: mmosher Front & rear need to be trimmed for length as well as narrowed a bit. And new hole for coupler screw needs to be drilled and tapped.
1 front 2 rear 3 rear coupler screw Michael Mosher Millville, NJ Date: 10/03/15 08:03 Re: rail power Sd90macH shell question? Author: NSTopHat RailPower made their own frame for their shell. Later Overland made a brass drive for the SD80/9043MAC's. You certainly could modify a Kato drive to fit the RPP shell.
Regards Russ Posted from Android Date: 10/03/15 08:28 Re: rail power Sd90macH shell question? Author: mmosher Also need to modify the shell some. Remove any thing hanging below the sill and cut away the cross members from the radiator section.
Michael Mosher Millville, NJ Date: 10/03/15 09:06 Re: rail power Sd90macH shell question? Author: hotmetal-train seems like alot of work......just get a kato sd90mac
Date: 10/03/15 09:52 Re: rail power Sd90macH shell question? Author: CR4110 Ok, I was thinking the Mac-H units where angled hoods and sd70m-2 style cabs? If those look like regular sd90/4300macs..
well thanks for the answers!! Posted from Android Date: 10/03/15 20:12 Re: rail power Sd90macH shell question? Author: trainupaboy hotmetal-train Wrote:
------------------------------------------------------- > seems like alot of work......just get a kato > sd90mac I have about 10..how many do you want? Posted from Android |