Home Open Account Help 381 users online

Model Railroading > DCC trouble

Date: 11/25/15 11:54
DCC trouble
Author: jmj3293

I recently developed an issue with my Digitrax system. When running trains certain locos are suddenly stopping and running in reverse and will not respond to anything until I take them off the track or shut the system OFF. Anyone? I'm at a loss.

Posted from iPhone

[ Reply To This Message ] [ Quote ]
Date: 11/25/15 12:11
Re: DCC trouble
Author: fbe

They may be in consist with other units.

Posted from iPhone

[ Reply To This Message ] [ Quote ]
Date: 11/25/15 12:42
Re: DCC trouble
Author: pmack

There are some CVs in the command station that reset it and all consists it's keeping track of.  I've used it occasionally when running a bunch of trains then taking them off the track without unconsisting them.  That might help.

See the end of this page for howto:
http://www.digitrax.com/tsd/KB869/troubleshooting-guide-for-digitrax-command-station/

[ Reply To This Message ] [ Quote ]
Date: 11/25/15 13:40
Re: DCC trouble
Author: jmj3293

I performed a reset and it seemed,,,,fingers crossed,,, solved the issue.  Thanks for the help.  
 

[ Reply To This Message ] [ Quote ]

[ Share Thread on Facebook ] [ Search ] [ Start a New Thread ] [ Back to Thread List ] [ <Newer ] [ Older> ] 
Page created in 0.0444 seconds