Home Open Account Help 296 users online

Steam & Excursion > ATSF 2926 Update - May 20, 2017


Date: 05/24/17 11:02
ATSF 2926 Update - May 20, 2017
Author: Cumbresfan

One new work status update has been posted together with two new photo/video sets. The first quarter 2017 society newsletter is also now online. Go to the Society's home page for these links and many others. For questions regarding restoration progress please direct them to the Society via the "Contact Us" link on their home page.

Home page location and alternate:
http://nmslrhs.org/
http://2926.us/

Picture: The "Foamer's Garden" is off-limits to kitties!




Date: 05/24/17 11:52
Re: ATSF 2926 Update - May 20, 2017
Author: NKPBernet

For those who don't care to click multiple times:

Work Session Status Week Ending 05/20/2017

May 23, 2017

The work, for the most part, mirrored the past several weeks as we continually prepare for the official FRA hydrostatic test. Many of the minor st​aybolt leaks are being closed by Dr. Scott A. We now have one washout plug to address and a few studbolt leaks.

The secondary dynamo piping was fabricated and insulated this week.

Jacketing work continues as our workers custom fit the various individual pieces. There are many penetrations and obstructions to work around.

Volunteers installed the MU splitter box at the rear of the tender with the holes cut-in for one conduit in and two out. They also painted and hung the 1 1/4" MU rigid conduit under the length of the tender. three MU receptacles were mounted to brackets which will be welded to the tender.

As mentioned on my last report at the General Meeting we have hired a painter. He will begin with a repaint of the tender removing many imperfections from the last paint job. He is scheduled to begin work on Monday, May 29th, but most likely the 30th as the 29th is Memorial Day. He thinks he'll be done in one week.

The temporary letters have already been removed. The new letters with the proper font will go on after the new pain has cured.

We found rust crud in one of our 26L pipe bracket orifices causing the control problems. The gunk was removed so the pipe bracket will be remounted with it's component.

The week should be good for working so hope to see everyone at the site, and as always . . .

Keep on Steamin',
Rick Kirby, CMO
NMSL&RHS



Date: 05/24/17 23:04
Re: ATSF 2926 Update - May 20, 2017
Author: Cumbresfan

dbesade Wrote:
-------------------------------------------------------
> For those who don't care to click multiple times:
>
> Work Session Status Week Ending 05/20/2017
>
> May 23, 2017
>
> The work, for the most part, mirrored the past
> several weeks as we continually prepare for the
> official FRA hydrostatic test. Many of the minor
> st​aybolt leaks are being closed by Dr. Scott A.
> We now have one washout plug to address and a few
> studbolt leaks.
>
> The secondary dynamo piping was fabricated and
> insulated this week.
>
> Jacketing work continues as our workers custom fit
> the various individual pieces. There are many
> penetrations and obstructions to work around.
>
> Volunteers installed the MU splitter box at the
> rear of the tender with the holes cut-in for one
> conduit in and two out. They also painted and hung
> the 1 1/4" MU rigid conduit under the length of
> the tender. three MU receptacles were mounted to
> brackets which will be welded to the tender.
>
> As mentioned on my last report at the General
> Meeting we have hired a painter. He will begin
> with a repaint of the tender removing many
> imperfections from the last paint job. He is
> scheduled to begin work on Monday, May 29th, but
> most likely the 30th as the 29th is Memorial Day.
> He thinks he'll be done in one week.
>
> The temporary letters have already been removed.
> The new letters with the proper font will go on
> after the new pain has cured.
>
> We found rust crud in one of our 26L pipe bracket
> orifices causing the control problems. The gunk
> was removed so the pipe bracket will be remounted
> with it's component.
>
> The week should be good for working so hope to see
> everyone at the site, and as always . . .
>
> Keep on Steamin',
> Rick Kirby, CMO
> NMSL&RHS

Avoid clicking any links at all. Become a member and you will get the work status updates automatically by email at least several days before they are posted online. You also get special news announcements for events of interest to members and those open to members only (usually around the holidays).



[ Share Thread on Facebook ] [ Search ] [ Start a New Thread ] [ Back to Thread List ] [ <Newer ] [ Older> ] 
Page created in 0.0612 seconds