| Home | Open Account | Help | 497 users online |
|
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Eastern Railroad Discussion > Hump and retarder questions?Date: November 02, 2026 11:12PM Hump and retarder questions? Author: JasonCNW First I want to say welcome back TO, this is my first post since the upgrade and it's great to be back. Thanks also to our webmaster for working hard doing the upgrades.
Now to my question and I have to be vague about the details as the investigation is ongoing. But this one is directed to those who have or do work at a Hump Yard. Is it possible or even likely that foreign material from a freight car leaking or blowing off the top or even caked to the wheels to cause the retarder to malfunction and send the cars into the bowl tracks at unsafe speeds? And too if somehow leaking product such as grain or powdered cement or any type of commodity like that would or could get into the retarder how much would it take of said product to cause the retarder to malfunction? Curious minds wish to know, thank you for any info. JC Posted from Android Date: November 03, 2026 04:29AM Re: Hump and retarder questions? Author: OHRY Absolutely foreign contamination can cause problems. It doesn't take a whole lot to make a big issue. Small silica like sand or salt act like tiny little ball bearings so when you let them go they will just slide right through. Liquids like corn syrup also made a mess.
Even rain can be a problem. I've sat several times humping cars where it's been just silent with a cloud of steam that would come off the group retarders when a car would go through. It's an eerie feeling and a bit unnerving. When working as a yardmaster I would try to be cognizant of cars I knew would be a problem and take steps to reduce issues like have a yard crew waiting clear of the switch at the west end of a track with the switch lined off in case of a run out. Or I'd make sure my track had a good establish blocker on it. Where I worked we had a rule for a clear track that the first 5 cars had to be cut singles. That is fine and dandy but if you get 5 overspeeds you know have a battering ram going towards the other end. It was better to take multiple cars because you'd at least have more wheels to grab onto. When I was a retarder operator before we had a computerized humo system I would crank the exit speed down as much as possible on the master. That way HOPEFULLY you would have a chance at the group retarders to do something. Once a retarder got contaminated there was little you could do about except run cars through and burn off whatever was on there. The absolute WORST cars were open hoppers of petroleum coke that we would get out of the refineries in south Philly. They would drip goo all over and make a giant mess. You'd have to run an entire track through afterwards to try to get everything to work right. Once I had 3 cars, 1 for track 28, 2 for track 27. My first car for 28 exited at the correct speed. However, number two was a corn syrup tank for Hershey it blew right through the bottom retarder and caught up to the first car for 28 before the system could throw the switch. Now I have a 2 car cut barreling down a clear track. The third car was also a Hershey tank and flew right out as well. This time though there was enough of a gap the computer threw the switch for 27. Now I have 2 cuts down two clear tracks with excessive speed. All I could do was tell the west end puller to get out of the way and stand clear. I watched in my binoculars as they approached the west end hoping the inert retarders would hold up. They didn't. I watched as the lead car came off 28 and started up the lead. As it was going over the 27 switch out came the car off 27 and plowed right into the side of it. Needless to say that was a cute little mess to clean up. Posted from Android Edited 3 time(s). Last edit at 11/03/2026 04:33AM by OHRY. Date: November 03, 2026 07:23AM Re: Hump and retarder questions? Author: nsrlink Short answer: Yes. The RR referrs to such as contaminated wheels.
The retarders can become "contaminated" if you have enough product leak out on to them. Then you get multiple overspeed exit errors. |