| Home | Open Account | Help | 368 users online |
|
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > D&RGW Baldwin VO-660Date: 05/24/17 07:51 D&RGW Baldwin VO-660 Author: lizzard45 I have had this Stewart Baldwin VO-660 for a while. When Microscale came out with their yellow D&RGW decal set, I bought on to finish this model.
The third picture shows what it looked like before I did some modification s to it. I had a friend with a 3D printer print some numbers for me, so the radiator would look like it did when the Grande ran these beasts.    Date: 05/24/17 08:10 Re: D&RGW Baldwin VO-660 Author: lizzard45 Here's the VO-660 67 from the DRGW.net. I couldn't get the numbers to sit as close together on the model.
 Date: 05/24/17 16:58 Re: D&RGW Baldwin VO-660 Author: UP3806 Marker lights would be a nice addition.
Tom Date: 05/24/17 18:44 Re: D&RGW Baldwin VO-660 Author: atsf121 Cool!
Date: 05/25/17 04:54 Re: D&RGW Baldwin VO-660 Author: SPDRGWfan It looks like the numbers on the front of the real thing are close together rather than centered on each panel.
Date: 05/26/17 07:33 Re: D&RGW Baldwin VO-660 Author: OregonOldGuy SPDRGWfan Wrote:
------------------------------------------------------- > It looks like the numbers on the front of the real > thing are close together rather than centered on > each panel. True, and about 50% of the size on the model. They jsut don't look right on the model 67. Rob Date: 05/26/17 08:22 Re: D&RGW Baldwin VO-660 Author: lizzard45 SPDRGWfan Wrote:
------------------------------------------------------- > It looks like the numbers on the front of the real > thing are close together rather than centered on > each panel. There's a box on the model that prevented them from being that close. And as for the size...these were 3D printed, and very fragile at this size. |