Home | Open Account | Help | 311 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > 1500 I have been fooling with............Date: 05/26/17 22:09 1500 I have been fooling with............ Author: ESPEE5318 I use to think SP had two basic versions of 1500s, the more I research the more variations I find. One of the problems with modeling (for me) is things get more and more extreme this started out as just assembling and painting the RTR 1500 with a few better detail parts I'm at the point that it is going to be all out to the best of my ability. This has been sitting years waiting on cut lever pilot notches and recently I finished that and then some, scale coupler boxes, fuel tank rework, flag holders (still need the cab ones), handrail oversize lugs removed and replaced (still an few to install), radiator fan area opened up, cast brake ratchet reworked, pilot sheet reshaped/step configuration change, more radiator parts should be ready next week...........Joe
Date: 05/26/17 22:09 Re: 1500 I have been fooling with............ Author: ESPEE5318 Date: 05/26/17 22:30 Re: 1500 I have been fooling with............ Author: lizzard45 Oh, CRUD! I mean that in the nicest way possible.
Date: 05/26/17 23:31 Re: 1500 I have been fooling with............ Author: atsf121 lizzard45 Wrote:
------------------------------------------------------- > Oh, CRUD! I mean that in the nicest way possible. That was funny! Posted from iPhone Date: 05/27/17 04:02 Re: 1500 I have been fooling with............ Author: BNModeler Very, very nice.
Can't wait to see it in paint! Date: 05/27/17 04:43 Re: 1500 I have been fooling with............ Author: Hookdragkick That is some clean work so far! Where did you source the door handles?
HDK Posted from Android Date: 05/27/17 06:44 Re: 1500 I have been fooling with............ Author: CNW Very nice work! Please post again with more progress. That will be a great model when it's finished.
Dennis Date: 05/27/17 07:56 Re: 1500 I have been fooling with............ Author: Betsy It's great to see you posting some model photos Joe! As usual, it shows sharp, clean work. Athearn's SW1500 has always been a nice little model, and the improvements you're making will bring it to the "next level." SP's cruds exhibited a few subtle changes over their production run, one of which is the equipment doors under the cab as modeled by Athearn. The ones on the left side sit a bit proud of the surface, a change reflected somewhere in the high 2500s. Looking forward to seeing more photos of this as you make progess.
Elizabeth Date: 05/27/17 08:26 Re: 1500 I have been fooling with............ Author: tracktime Beautiful work! Please keep us posted.
Cheers, Harry Date: 05/27/17 14:26 Re: 1500 I have been fooling with............ Author: ESPEE5318 Hookdragkick Wrote:
------------------------------------------------------- > That is some clean work so far! Where did you > source the door handles? > > HDK > > Posted from Android They are OMI which are no longer available, I don't think it would be hard to make look alikes with some brass rod bent 90 and some filing shaping etc when I run out of OMI's that's what I will start doing....would not surprise me it there is something else that would work from one of the brass casting company's that I'm just not aware of, I like to use them on the generator access door on second gen EMDs............Joe Date: 05/27/17 14:35 Re: 1500 I have been fooling with............ Author: ESPEE5318 Betsy Wrote:
------------------------------------------------------- > It's great to see you posting some model photos > Joe! As usual, it shows sharp, clean work. > Athearn's SW1500 has always been a nice little > model, and the improvements you're making will > bring it to the "next level." SP's cruds > exhibited a few subtle changes over their > production run, one of which is the equipment > doors under the cab as modeled by Athearn. The > ones on the left side sit a bit proud of the > surface, a change reflected somewhere in the high > 2500s. Looking forward to seeing more photos of > this as you make progess. > > Elizabeth Had me scared for a moment had not noticed that, I'm doing one from the last order with self aligning couplers so I'm good on the equipment doors. Other things I have noticed the door to the left of the ratchet they used 3 different doors over the years of construction, 3 different pilot sheet shapes over the years of construction. Date: 05/27/17 15:41 Re: 1500 I have been fooling with............ Author: MrMRL Stellar work so far Joe. Based on the masterpieces you've completed in the past, this little switcher is in good hands for the super detailing to come. Can't wait to see it progress through the upcoming stages!
~ Mr. MRL Date: 05/28/17 18:41 Re: 1500 I have been fooling with............ Author: dh30973 OMG, Joe is alive!!!
Great to see you modeling again.,would be good to see you again. Dave Date: 05/28/17 19:04 Re: 1500 I have been fooling with............ Author: sixaxlecentury Date: 05/28/17 20:46 Re: 1500 I have been fooling with............ Author: bnsfsd70 Looks great so far!
- Jeff Carlson Date: 05/28/17 21:21 Re: 1500 I have been fooling with............ Author: ESPEE5318 sixaxlecentury Wrote:
------------------------------------------------------- > Fantastic! > > Are you going to be using the KV Models radiator > and screen? I love mine.. I did not know the KV parts existed until yesterday, would of saved me some time but I'm 80% there on radiator parts at this point....Joe |