Home | Open Account | Help | 311 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > Time to call out the track welder...Date: 04/11/19 11:02 Time to call out the track welder... Author: MrMRL Date: 04/11/19 11:20 Re: Time to call out the track welder... Author: SPDRGWfan Or needle nose pliers and a jewler file?
Date: 04/11/19 12:46 Re: Time to call out the track welder... Author: exrtc Form Z: Main track out of sevice
between siding switches at ______ Switches lines at secured for siding Trains will move through siding At restricted speed CBR Date: 04/11/19 14:12 Re: Time to call out the track welder... Author: RGZ17 Oh Foreman Kelley where are you?!
What's the milepost location Date: 04/11/19 15:14 Re: Time to call out the track welder... Author: santafesteve That is NOT ok on the repeat. It is the EMPLOYEE IN CHARGE at MP 499.1, not foreman Kelley. It is KELLY, GOT THAT MAGOT ! ! !
Edited 1 time(s). Last edit at 04/11/19 15:21 by santafesteve. Date: 04/11/19 15:20 Re: Time to call out the track welder... Author: LarryDoyle HOW did you do that????
-LD Date: 04/11/19 15:25 Re: Time to call out the track welder... Author: santafesteve I did'nt do it. NOBODY did it. Ask them they will tell you so.
Date: 04/11/19 16:42 Re: Time to call out the track welder... Author: atsf5704 santafesteve Wrote:
------------------------------------------------------- > I did'nt do it. NOBODY did it. Ask them they will > tell you so. I blame it on having too much Rio Grande equipment on the layout. Date: 04/11/19 20:34 Re: Time to call out the track welder... Author: MrMRL The restriction can now be marked as 'void'. Luckily the point didn't break off, it was bent back into position. We'll have to keep an eye on it though as the metal has probably been weakend significantly at this point due to the movement.
~ Mr. MRL Date: 04/11/19 21:28 Re: Time to call out the track welder... Author: inCHI With such a close up view that ballast looks really good. What brand is it?
Date: 04/11/19 21:36 Re: Time to call out the track welder... Author: ChrisCampi Nice job on the repair. Heating the point with a soldering iron first might make it a bit more pliable.
Date: 04/11/19 22:12 Re: Time to call out the track welder... Author: MrMRL inCHI Wrote:
------------------------------------------------------- > With such a close up view that ballast looks > really good. What brand is it? Good old reilable Woodland Scelics Medium Gray Blend, with sme Fine of the same color sprinkled in. ~ Mr. MRL Date: 04/12/19 08:36 Re: Time to call out the track welder... Author: jcaestecker I've asked around and, as usual, the employees responsible were identified as "Not me" and "I don't know."
If I could just catch those two guys and terminate 'em.... -John Date: 04/12/19 09:57 Re: Time to call out the track welder... Author: Hookdragkick jcaestecker Wrote:
------------------------------------------------------- > I've asked around and, as usual, the employees > responsible were identified as "Not me" and "I > don't know." > > If I could just catch those two guys and terminate > 'em.... > > -John Spoken like a true company man. Date: 04/12/19 10:22 Re: Time to call out the track welder... Author: jointauthority It looks good to me, what’s the problem?
Posted from iPhone Date: 04/12/19 10:23 Re: Time to call out the track welder... Author: TCnR After they get Track and Time maybe get the Dremel Operator to take out that molded plastic do-hickey on the throwbar.
Nice details of the switch motor, head block and general ballast work. Details do make a difference. t4p. Date: 04/13/19 07:51 Re: Time to call out the track welder... Author: BAB Actuator pin looks just a little high found one of mine the same, engine stopped all by itself suddenly. LOL
|