Model Railroading > Tsunami 2 - Consisting sounds

Hi all.

I picked up a couple of Athean Genesis GP9's (DCC & Sound) recently, and have managed to get them on the layout and consisted nicely. The only thing that is eluding me, is the ability to get the dynamic brakes sounds working on both models with the pressing of F4. I have a Digitraxx Super Chief System, with a DT502 throttle. In order to get the dynamic brake sound working on the second loco, I have to activate it seperately via the left hand throttle (lead loco is on the right throttle).

There must be a CV setting or something that I can't think of (or read about) at present. So if anyone has some advice/info, I'd be open to reading about it.

Many thanks in advance.

Allister

New Zealand.

Are you just MUing or using advanced consisting? 
This is easy to do when using JMRI but don't know what the CV#s are & have done this with T1,2 & ESU. 
You get to choose what functions you want to work with the Advanced Consisting #.
 

Tim Hanesworth
Santa Rosa, CA

Advanced consisting is explained well in the Tsunami'2's manual if that's what your using. Simply add up the numbers of the functions your want include on a unit and add to CV 21 and 22.

---

---

Traditionally I've just been Mu'ing the locos, and have not used the Advanced Consisting.

Allister