Home | Open Account | Help | 337 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Steam & Excursion > Ever Wonder How Number Plates Were Designed?Date: 11/10/12 16:47 Ever Wonder How Number Plates Were Designed? Author: LoggerHogger In the days of steam locomotives, every part and piece that was installed on these fine engines was carefully designed at the builders using blueprints in the process. No detail was left to chance. When you bought one of these fine machines from the builder, such as The Baldwin Locomotive Works, you got a book of blueprints for every part on your locomotive.
Here is an example of the blueprint used by Baldwin for the design and manufacture of their number plate during the 1920's. Every detail and dimension was recorded on this blueprint to be used in the foundry to make the plate for the locomotive. Notice how the size of the numbers changes depending on how many digits are in the engine number. For comparison, I am showing you a Baldwin number plate from my collection so you can see how faithfully the blueprints were followed. This plate is off Deer Island Logging Col #101 a 2-6-2T that worked in the Oregon Coast Range. Martin Date: 11/11/12 07:26 Re: Ever Wonder How Number Plates Were Designed? Author: filmteknik Seen mostly on small carriers. I suppose this was standard equipment that one could delete if using one's own number plate.
Date: 11/11/12 07:28 Re: Ever Wonder How Number Plates Were Designed? Author: wabash2800 Looks like they dropped the comma after Philadelphia for a period or didn't have enough room.
Date: 11/11/12 08:55 Re: Ever Wonder How Number Plates Were Designed? Author: filmteknik Good catch. No reason for a period there and not in the design. A mistake or some sort of casting issue.
Date: 11/11/12 11:42 Re: Ever Wonder How Number Plates Were Designed? Author: LoggerHogger Actually, what appears to be a coma in the blueprint is really just a flaw in the print. None fo the number plates had a cama on them - just periods.
Martin Date: 11/12/12 15:42 Re: Ever Wonder How Number Plates Were Designed? Author: davebb71 the "A" dimension is one thing, but look at the "B" and "C" dimensions, they vary widely??? a mounting issue?? dave, out.
|