Home | Open Account | Help | 339 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > P2K SD45 Truck Frames.Date: 06/19/17 08:33 P2K SD45 Truck Frames. Author: SD608708 Looking for P2K SD45 truck side frames or the complete truck with side frames.
Paul B Canton, GA Date: 06/19/17 20:47 Re: P2K SD45 Truck Frames. Author: seod You might try Walther's. I bought a P2K SD45 at a swap meet really cheap well it did not run very well and in disassembly one of the tower gears was in pieces. I wrote to Walther's and they actually had the gear sure it cost more to ship than buy but I had a BN SD45 that ran great for very little money. I would guess that the parts supply will be very limited but it never hurts to check.
Scott O'Dell Date: 06/20/17 12:35 Re: P2K SD45 Truck Frames. Author: SD608708 Walthers does not have the side frames or complete trucks in stock.
Paul B Canton, GA Date: 06/20/17 17:04 Re: P2K SD45 Truck Frames. Author: ESPEE5318 I switched all my p2k sd45 related projects over to Athearn sd38/40/45 chassis, so I had a bunch of p2k sd45 chassis at one time, I went through my stuff thinking I might still have some but no luck I must have sold them all off....Joe
Date: 06/20/17 18:21 Re: P2K SD45 Truck Frames. Author: SD608708 Thanks Joe. Did you use the P2K body on the Athearn chassis?
Paul B Canton, GA Date: 06/20/17 18:23 Re: P2K SD45 Truck Frames. Author: ESPEE5318 Yes I did, that gave me better truck side frames made from styrene and more side frame options, better fuel tank, readily available replacement parts etc etc..........Joe
Edited 1 time(s). Last edit at 06/21/17 00:41 by ESPEE5318. Date: 06/21/17 06:57 Re: P2K SD45 Truck Frames. Author: SD608708 Were these frames ready run, genesis or blue box?
Paul B Canton, GA Date: 06/21/17 10:45 Re: P2K SD45 Truck Frames. Author: ESPEE5318 RTR, I was using the P2K chassis on these projects and was content but when the Athearn RTR SD40/38/45 came out and was very available, the wheels started turning in my head as to the advantages of the switch. Some machining is needed, I did quite a few for myself and others.........Joe
Date: 06/21/17 18:04 Re: P2K SD45 Truck Frames. Author: SD608708 Good information. I give it a try.
Paul B Canton, GA |