Home | Open Account | Help | 219 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > Walthers GP35 DCC issueDate: 10/11/17 08:15 Walthers GP35 DCC issue Author: livesteamer Just got a new Walthers GP35 and I think I have a rather odd problem. When activating the bell or horn on the GP35, my Broadway Limited GG1's bell or horn also operate. The engines do not share the same loco number. Any ideas? BTW, the GG1 does not move when the GP35 is moving.
Marty Harrison Knob Noster, MO Date: 10/11/17 08:44 Re: Walthers GP35 DCC issue Author: fbe Is this on a DCC or DC layout?
My guess this is a BLI problem, though. What happens to your GP35 when you blow the horn on the GG1 address? Edited 1 time(s). Last edit at 10/11/17 08:47 by fbe. Date: 10/11/17 09:03 Re: Walthers GP35 DCC issue Author: Hartington It might be interesting to know the 2 and 4 numeral addresses for each locomotive.
Date: 10/11/17 10:12 Re: Walthers GP35 DCC issue Author: livesteamer DCC railroad; GP35 is #2569 and GG1 is #4905
Marty Harrison Knob Noster, MO Date: 10/11/17 11:41 Re: Walthers GP35 DCC issue Author: livesteamer I am going to try and reset both engines back to their factory defaults and then reprogram from the beginning.
Marty Harrison Knob Noster, MO Date: 10/11/17 18:33 Re: Walthers GP35 DCC issue Author: livesteamer Uncovered the issue; I left the GG1 on the end a very long lead that is not isolated from the programing track. Duh!
Marty Harrison Knob Noster, MO Date: 10/11/17 19:10 Re: Walthers GP35 DCC issue Author: fbe Good to know there was a forthright solution.
|