Home Open Account Help 359 users online

Model Railroading > Santa Fe RDC


Date: 03/28/20 06:46
Santa Fe RDC
Author: santafedan

A post on the Nostalgia page prompted me go shoot a new set of photos of my RDCs.  I am also experimenting with my depth of focus set up.
I made these Athaern RDCs about 40+ years ago,  These were about the only ones around.  I repainted them in the "after the wreck" scheme.  It took a weekend to do. I even submitted an article to MR as a weekend project they were running in those days.  They thought there would be no interest.






Date: 03/28/20 07:37
Re: Santa Fe RDC
Author: RailRat

"Like" button activated.
Very handsome looking RDC's.

Jim Baker
Riverside, CA



Date: 03/28/20 07:53
Re: Santa Fe RDC
Author: Jckaufman

Nice trestle and scene around it.  Thanks.



Date: 03/28/20 07:57
Re: Santa Fe RDC
Author: UP951West

Your ATSF RDC's look great to me ! Thanks for sharing your images of them.  --Kelly



Date: 03/28/20 08:29
Re: Santa Fe RDC
Author: cabman

I like the job you did on the red ends.  I also had this set many moons ago, and if I recall,  they ran via the awful rubber band drive.  To slow them down, I installed Ernst gearing which really solved the problem....almost too much.  



Date: 03/28/20 09:27
Re: Santa Fe RDC
Author: santafedan

cabman Wrote:
-------------------------------------------------------
> I like the job you did on the red ends.  I also
> had this set many moons ago, and if I recall, 
> they ran via the awful rubber band drive.  To
> slow them down, I installed Ernst gearing which
> really solved the problem....almost too much.  

That is what I did for them, also.  A little noisy though.



Date: 03/28/20 12:32
Re: Santa Fe RDC
Author: atsf121

Nice work



Date: 03/28/20 14:00
Re: Santa Fe RDC
Author: RRBMail

Excellent, never mind Clambake!



Date: 03/28/20 14:19
Re: Santa Fe RDC
Author: BostonMaine

Thank you for the posting Dan
 



[ Share Thread on Facebook ] [ Search ] [ Start a New Thread ] [ Back to Thread List ] [ <Newer ] [ Older> ] 
Page created in 0.0419 seconds