Model Railroading > Custom details Rapido Conrail B36-7 video

Finally was able to load up the video.  Remove the stock cab and install a Cannon and Company interior cab, remove the stock 21 pin board and installed the Decoder Buddy 21 pin board.  I installed all new 402 leds interior cab lights engineer and conductor side, console lights, EOT box and radio panel buttons lights and cab signal box. Also deck and step lights and re-did the marker lights and headlights. Includes a Scale sound speaker and custom weathering. Also forget to mention it equipped with a Loksound V5 decoder 



Edited 1 time(s). Last edit at 02/04/23 21:20 by kecarden.

You must be a registered subscriber to watch videos. Join Today!

Nicely done. Is that still the esu? The scale sounds speaker has a nice idle.

Tom
Weaverville, CA

Very nice! What kind of 402 SMD LED did you get to replicate the soft glow, instead of the typical overly bright light only good for headlights?

Ted Curphey
Cheney, WA

If you look real close in the cab you can see the cab signals
 

---