Model Railroading > SP Searchlight Signal heads.

Date: 09/12/23 16:04
SP Searchlight Signal heads.
Author: ajgreen

Hi all.

Hoping someone can share some info on the dimensions of the SP Searchlight signal heads. Done a google search and come up blank. Looking to 3D Print some on my Ender 3 S1 printer. I can model the shape easily once I know the sizes.

So if anyone can share any dimensions it would be great.

Sadly being here in NZ, means looking up books isn't that easy.

Many thanks in advance.

Allister
New Zealand.

[ Reply To This Message ] [ Quote ]

Date: 09/13/23 00:36
Re: SP Searchlight Signal heads.
Author: tmotor

Greetings Allister!

> Hoping someone can share some info on the
> dimensions of the SP Searchlight signal heads.

Generally shy of 36" will be fine.

These specs from Union Switch and Signal Company shows 35".

Take care and God bless!
Dave

Edited 2 time(s). Last edit at 09/13/23 00:39 by tmotor.

[ Reply To This Message ] [ Quote ]

Date: 09/13/23 07:04
Re: SP Searchlight Signal heads.
Author: up833

I just measured SP 699.7, US&S, Target is 35", Hood is 16" deep and the lens is 8" Not all hood depth are the same, but I think 16 is a good average.
RB

[ Reply To This Message ] [ Quote ]

[ Share Thread on Facebook ] [ Search ] [ Start a New Thread ] [ Back to Thread List ] [ <Newer ] [ Older> ]

Discussion

Media Sharing

Hosting

Library

Site Info

Model Railroading > SP Searchlight Signal heads.