Home Open Account Help 265 users online

Model Railroading > decoder questions


Date: 10/17/24 16:12
decoder questions
Author: Charls

Hi all two quick questions on not responding decoders:
1. I have a locomotive setup from old days that has both a motor decoder and a sound only decoder that was the way at the beginning of dcc sound, the motor one works but the sound sudddenly quit, no funky sound or else just silent they were set up at the same addresss so is the likely that it is toast for some reason
2 I have a set up where the sound decoder suddenly doesnt respond to command or address, but the horn come on on its own and constant, there is spurt of moving motor movement then stop, I try to reset it to default value, no change, I am to consider it also toast
Thanks
Charls



Date: 10/17/24 18:39
Re: decoder questions
Author: railstiesballast

If you have access to the manufacturer's tech manual and can do a decoder reset, that might work.



Date: 10/17/24 20:40
Re: decoder questions
Author: tracktime

I agree with railtiesballast! (as always!). Give that reset a shot (usually setting cv8= 8).

Cheers,
Harry



Date: 10/18/24 06:24
Re: decoder questions
Author: funnelfan

With something that old, I would consider just swapping for a modern sound decoder that also has the motor and light controls. The sound will be wayyy better using the Tsunami, ESU or TCS decoders.

Ted Curphey
Ontario, OR



[ Share Thread on Facebook ] [ Search ] [ Start a New Thread ] [ Back to Thread List ] [ <Newer ] [ Older> ] 
Page created in 0.0278 seconds