| Home | Open Account | Help | 333 users online |
|
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Steam & Excursion > ORHC - turntable project - rim rail
Current Page:2 of 2
Date: 01/18/23 23:14 Re: ORHC - turntable project Author: Jim700 A few more pictures - (1) the descriptive sign and builder identification, (2) looking across the pivot mounting location, and (3) looking through one half of the length of the turntable.
Edited 1 time(s). Last edit at 01/18/23 23:16 by Jim700.    Date: 01/19/23 10:00 Re: ORHC - turntable project Author: asheldrake thanks Jim for the additional pictures. edits of this interpretive sign are welcomed as I hope something similar will be on one of the interpretive signs on the fence line around the TT pit. the rehab job on this turntable bridge was a great success. Arlen
Date: 01/19/23 14:07 Re: ORHC - turntable project - rim rail Author: Jsporseen Since it is dry and not raining right now obviously it is a good time to put a sealant of some type on the top of the wall and do some tamping in the pit.
John Edited 1 time(s). Last edit at 01/19/23 14:08 by Jsporseen. You must be a registered subscriber to watch videos. Join Today! Date: 01/19/23 15:58 Re: ORHC - turntable project - rim rail Author: asheldrake the contractor told me today it is 130 lb rail.....I am assuming it was rolled in the early 1920s. pivot install in some days. Arlen
Date: 01/19/23 19:48 Re: ORHC - turntable project - rim rail Author: callum_out That might not be railroad rail but rather bridge rail as used on large traveling cranes.
Out
Current Page:2 of 2
|