Home | Open Account | Help | 356 users online |
Member Login
Discussion
Media SharingHostingLibrarySite Info |
Model Railroading > LV Hammerhead RS-3 #211Date: 02/19/12 06:53 LV Hammerhead RS-3 #211 Author: 1802 I'm in the planning stages of building this loco in HO scale & need some info. I already have the Detail Associates RS-3 Hammerhead kit & the Stewart RS-3 kit for starters, but have a couple of questions - was this unit equiped with a steam generator?? The Detail Associates kit gives instructions as to the location of the steam generator exhaust stack, but I do not see an exhaust stack on any of the photos I have of this unit. Also, anyone know who makes the detail part for the number boards specific to this loco & what that part number might be? Insight from anyone who has ever attempted one of these kits is welcomed. Many thanks...
Jeff Date: 02/19/12 07:05 Re: LV Hammerhead RS-3 #211 Author: wlankenau The reason for the "hammerhead" was to accommodate a steam generator and dynamic brakes. The s/g stack would not have extended very far, if at all, above the top of the hood. Later in life this unit had its s/g removed, so depending on your era, it might or might not have the stack. I would think that in the LV era, it would not.
This shot shows it after rebuilding by Conrail as a "DeWitt Geep" with no s/g or d/b: http://www.rrpicturearchives.net/showPicture.aspx?id=198515 This one, pre-CR, appears to show d/b grids and maybe an s/g intake on the short hood: http://www.rrpicturearchives.net/showPicture.aspx?id=2722806 It's tough to find down-on detail views! Edited 1 time(s). Last edit at 02/19/12 10:26 by wlankenau. |